How to maintain car inspection tools
1: Ensure the dryness of the environmental factors of the car inspection tool: the storage temperature is guaranteed to be between minus 10 degrees Celsius and 60 degrees Celsius; the humidity must be below 60%; the particles cannot exceed 2%.
2: Basic maintenance of automobile inspection jigs: ensure that the exterior of the inspection jig simulation block is clean, and some plugs, detection pins, bottom plates, etc. must be kept clean; place the moving parts that need to be disassembled in corresponding positions.
3: The maintenance time can be processed in half a year or once a year:
4: Check whether the bolt hole is worn, and replace it if there is any problem;
5: Check if there is any looseness in the precision slide, add lubricating oil;
6: Check whether the positioning reference is worn and rusted, and some may be replaced or polished in time;
7: Check the marking scale and coating for wear and tear in time.